|
Post by rogerfries on Jan 7, 2013 15:29:23 GMT -8
When I try to do a "Save as" on the Tooling page to save the tool table I get "Error on line: 1114 - Type mismatch"
Windoze XP MSM Pro 2.0.6 Mach 3 3.0.43.066
Love MSM thanks!
|
|
|
Post by DaveCVI on Jan 7, 2013 18:44:01 GMT -8
Hi Roger, Hum, works ok when I test it - so I've some questions for you... 1) this is a mill mode tool table - correct? 2) any error messages displayed before that type mismatch message? Any entries of note in the history log file? 3) have you recently updated MSM from a prior version? if so what MSM version did you update from? 4) does this happen every time you try to do a "save as"? If so, please do this: a) click "save Mach TT" - that gets the internal mach TT saved to disk in mach's internal format. b) please email C:\Mach3\Macros\<your profile name>\tools3.dat to me. c) also email to me the .m3tt file that you were trying to save when if gave the error message.
Dave
|
|
|
Post by rogerfries on Jan 16, 2013 19:02:58 GMT -8
1) this is a mill mode tool table - correct? Yes Mill Mode2) any error messages displayed before that type mismatch message? No other errorAny entries of note in the history log file? Data from the Log Tue - 23:56:35 ---Tool Change...Press CycleStart to continue. Tue - 23:56:35 ---Moving To TC Position... Tue - 23:56:36 ---Press CycleStart after Tool Change Tue - 23:57:13 ---Tool Change Complete. Wed - 00:09:06 ---END OF PROGRAM Wed - 02:01:56 ---External EStop Requested. Wed - 21:27:14 ---External EStop Requested. Wed - 21:27:16 ---External EStop Requested. Wed - 21:27:21 ---External EStop Requested. Wed - 21:27:23 ---External EStop Requested. Wed - 21:32:40 ---Error on line: 1114 - Type mismatch
3) have you recently updated MSM from a prior version? if so what MSM version did you update from? ver 2.0.04) does this happen every time you try to do a "save as"? YesIf so, please do this: Yesa) click "save Mach TT" - that gets the internal mach TT saved to disk in mach's internal format. b) please email C:\Mach3\Macros\<your profile name>\tools3.dat to me. c) also email to me the .m3tt file that you were trying to save when if gave the error message. Mach tool table attached, the .m3tt never savedThis is not a blocking issue for me. Everything else is working perfectly. The tool table saves ok. I just can't do a "Save as" Thanks! Attachments:
|
|
|
Post by DaveCVI on Jan 17, 2013 9:19:42 GMT -8
Hi Roger, The tools3.dat file has some corrupted data in it and that was crashing the MSM save as routine. MSM should handle that more gracefully, and I'm adding a fix for this in the next release. In the mean time, attached is a fixed mach tool table. please copy this to C:\Mach3\Macros\<your profile name>\tools3.dat Then fire up mach/msm and try the save as again. Please let me know if the save now is OK or not (that will confirm the problem & solution to me) Dave Attachments:
|
|
|
Post by rogerfries on Jan 17, 2013 21:42:03 GMT -8
Dave,
The Tool table correction seems to have donr the trick. Thanks!
|
|
|
Post by DaveCVI on Jan 18, 2013 9:54:36 GMT -8
OK, the fix will be in the next MSM release. Dave
|
|