|
Post by cherokee140d on May 15, 2012 11:13:53 GMT -8
Updated to Mach .062 & installed MSM Lathe only (Latest Beta). However when I bring up the screen it is Mill Turn not TURN. Any thoughts. Thanks, John
|
|
|
Post by DaveCVI on May 15, 2012 12:56:56 GMT -8
It has to default to either mill-turn or turn when first installed. I choose mill-turn. You change it the same way you change the screen resolution in use: Settings page, load screen button, pick the one you want - it will stick until the next install. It also defaults on new install to 10x7 resolution - so that if you do something silly (like change to 12x9 on a physical 10x7 screen and can no longer see the buttons to get to the setting common screen to change back) a re-install will put things back to a usable combination.
Dave
|
|
|
Post by cherokee140d on May 15, 2012 13:58:35 GMT -8
Dave
Will do
Thanks, John
|
|