Tool Table Not Sticking

[cherokee140d]

MSM 2.0
Mach .066
XP

When I open MSM the tool table is 1 tool number too low.
e.g. Tool # 1 Msg= Tool 0 is not.......

Load saved tool table all is well. Tool 1 = Master Tool.
Save this table.
Same result on next opening.

?

Thanks, John

[DaveCVI]

John,
The MSM versiion you gave did not have the build digit... if you are on 2.0.0, see item 7.10 in the release notes. That is likely the issue.
Assuming it is the problem, the cure is to update MSM. I'd update to 2.0.6

Dave

[cherokee140d]

Dave

Will check the machine tomorrow.

My laptop is running 2.0.5 and is ok.

Thanks, John

[DaveCVI]

John,
MSM 2.0.5 was the first production release with that bug fix
Dave