Run From Here

[wildgrav]

Using Version MACH 43.66 with SS Version V17F CNC4PC C23 BOB
MSM2.0.5. PRO Windows 7 64bit running 3 Axis Mill

Hi All

I cannot get "Run From Here"going. It gets to the " start the spindle" window but the spindle won't start. Tried starting the spindle first but it won't let you RUN FROM HERE

Regards

Noel

[DaveCVI]

Hi,
hum... I'm not able to create a problem when I test this -

I used the happy face sample program and set the current line to the M05 just before the 2nd tool change (line 45) and clicked run from here....
I then got:
- Press cycle start for prep move, I clicked cycle start
- the mach prep move dialog, I checked start spindle and clicked OK, spindle came on, and mach did the prep move.
(is this the "Start the spindle window" that you referred to?)

- got cycle start to execute from here - clicked cycle start and the program continued from that line.

I am running a PP (Not a SS), but I wouldn't expect that to matter for run from here (but I've been surprised by mach before).

Dave