|
Post by wallerawang on Apr 12, 2012 21:00:21 GMT -8
Hi Everyone I use a 2 axis lathe and most of the time I make longer - thinner items but today I made a short wide item - 300mm diameter about 20mm long which didn't suit the tool path display as currently set up in MSM Turn. Dave is there a chance of a tool path screen as in the mill set so I can see what's happening when I do a wide job? Thanks Steve
|
|
|
Post by DaveCVI on Apr 13, 2012 9:12:10 GMT -8
Hi, I always try to listen to user feedback - so your desire is noted. Now we will see if there are others with the same desire.... In any case, it would not happen right away. During the beta phase, I'm focused on increasing stability and eliminating any bugs reported so the beta features can move into a production release. Rearranging screens or adding new pages tends to work against that; so it could not be until after the Turn/mill-turn beta finishes. Dave
|
|
|
Post by DaveCVI on Apr 25, 2012 19:02:42 GMT -8
Steve,
Check out MSM 1.3.8 beta - MSM now has the big path screens in Turn and Mill-Turn.
Dave
|
|
|
Post by wallerawang on Apr 25, 2012 22:17:15 GMT -8
Hi Dave I have just tried it out and it looks great - thank you for changing it at this late stage. Steve
|
|
|
Post by DaveCVI on Apr 26, 2012 6:44:08 GMT -8
FYI - just released 1.3.9 beta - a minor change to the new big path pages for Turn & Mill-turn.
Dave
|
|