|
Post by DaveCVI on May 12, 2011 8:50:15 GMT -8
Hi, Due to popular request, I've started to expand the MSM feature introduction videos on the CVI website. The new video set demos the probing operations which are part of the MSM Professional Edition. In the video series I walk thru most of the probing operation panels and demonstrate the probing ops. The videos have both the MSM screens and a video windows of the probing actions on the mill - so that on can see the coordinated motions which result from starting a probe operation. As time allows, I plan to expand the videos to cover additional MSM features including Tool change options and auto TLO measurements using a TCP TP. The videos are on the MachStdMill/videos page at www.CalypsoVentures.comDave
|
|
|
Post by DaveCVI on Aug 22, 2011 17:48:26 GMT -8
Hi, New videos have been added to the MSM video page at www.CalypsoVentures.comOnce video walks through the setup process for calibration of the TCP TP location. Another video (in 3 parts) demonstrates the ease of automatinc tool measurements when using Master Tool Mode. Dave
|
|
|
Post by DaveCVI on Aug 26, 2011 15:32:54 GMT -8
Hi,
I have added a new video to the CVI site:
This is a demonstration how the use of mutliple MSM options together can simply both Job setup and tool handling.
In this video Master Tool modes is employed and the Probe Tool is used as the Master Tool. With this combination of features, it is a single click to set the WC origin for the stock, and and MSM automatically measures tools for you as part of the tool change sequence.
Dave
|
|